INCH-POUND
MIL-DTL-25524E(USAF)
20 November 1997
SUPERSEDING
MIL-T-25524D(USAF)
8 April 1994
DETAIL SPECIFICATION
TURBINE FUEL, AVIATION, THERMALLY STABLE
This specification is approved for use by the Department of the Air Force and
is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification was thoroughly reviewed as a part of acquisition reform. While most of the
requirements were converted to performance terms, due to the military-unique nature of the product (see 6.1) and
the need for compatibility with deployed systems, it was determined that not all requirements could be converted.
The issuance of this specification as "detail" is not intended to constrain technology advances in future systems.
This specification covers one grade of turbine fuel designated as JPTS (see 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements cited in sections 3 and 4 of this specification,
whether or not they are listed.
2.2 Government documents
2.2.1 Specifications and standards. The following specifications and standards form a part of this document to
the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of
the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the
solicitation (see 6.2).
SPECIFICATIONS
DEPARTMENT OF DEFENSE
MIL-I-25017
Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (Metric)
MIL-I-85470
Inhibitor, Icing, Fuel System, High Flash, NATO Code Number S-1745
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in
improving this document should be addressed to: ASC/ENSI, Bldg 560, 2530 Loop Rd, West, Wright-Patterson
AFB OH 45433-7101, by using the self-addressed Standardization Document Improvement Proposal (DD Form
1426) appearing at the end of this document, or by letter.
AMSC N/A
FSC 9130
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business