For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

MIL-DTL-83133 Turbine Fuel, Aviation, Kerosene Type, Jp-8 \(Nato F-34\), Nato F-35, And Jp-8+100 \(Nato F-37\)This specification covers three grades of kerosene type aviation turbine fuel, JP-8 \(NATO F-34\), NATO F-35, and JP-8+100 \(NATO F-37\). This specification was thoroughly reviewed as a part of acquisition reform. While most of the requirements were converted to performance terms, due to the military-unique nature of the product \(see 6.1\) and the need for compatibility with deployed systems, it was determined that not all requirements could be converted. The issuance of this specification as "detail" is not intended to constrain technology advances in future systems.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19


. .
MIL-DTL-83133H
ASTM D6304
Standard Test Method for Determination of Water in Petroleum
Products, Lubricating Oils, and Additives by Coulometric Karl Fischer
Titration (DoD Adopted)
ASTM D6890
Standard Test Method for Determination of Ignition Delay and Derived
Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant
Volume Chamber
ASTM D7153
Standard Test Method for Freezing Point of Aviation Fuels (Automatic
Laser Method)
ASTM D7154
Standard Test Method for Freezing Point of Aviation Fuels (Automatic
Fiber Optical Method)
ASTM D7170
Standard Test Method for Determination of Derived Cetane Number
(DCN) of Diesel Fuel Oils--Fixed Range Injection Period, Constant
Volume Combustion Chamber Method
ASTM D7224
Standard Test Method for Determining Water Separation
Characteristics of Kerosine-Type Aviation Turbine Fuels Containing
Additives by Portable Separometer
ASTM D7359
Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic
Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic
Combustion followed by Ion Chromatography Detection (Combustion Ion
Chromatography-CIC)
ASTM E29
Standard Practice for Using Significant Digits in Test Data to Determine
Conformance with Specifications (DoD Adopted)
IEEE/ASTM SI10
American National Standard for Metric Practice (DoD Adopted)
(Copies of these documents are available at ASTM International, 100 Barr Harbor Drive, PO Box C700,
West Conshohocken PA 19428-2959. Electronic copies of ASTM standards may be obtained from
UNIVERSAL OIL PRODUCTS
UOP 389
Trace Metals in Organics by Wet Ashing-ICP-OES
(Copies of these documents are available at Universal Oil Products, UOP LLC, 25 East Algonquin Road,
P.O. Box 5017 Des Plaines, IL 60017. Electronic copies are available through ASTM International at
ENERGY INSTITUTE
IP 170
Determination of Flash Point -- Abel Closed-Cup Method
IP 540
Determination of the Existent Gum Content of Aviation Turbine Fuel --
Jet Evaporation Method
IP 564
Determination of the Level of Cleanliness of Aviation Turbine Fuel --
Laboratory Automatic Particle Counter Method
IP 565
Determination of the Level of Cleanliness of Aviation Turbine Fuels --
Portable Automatic Particle Counter Method
IP 577
Determination of the Level of Cleanliness of Aviation Turbine Fuel --
Automatic Particle Counter Method Using Light Extinction
6



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.