An Integrated Publishing, Inc. Site

An Integrated Publishing Website

MIL-DTL-38219 Turbine Fuel, Low Volatility, Jp-7This specification covers one grade of aviation turbine fuel designated as JP-7. This specification was thoroughly reviewed as a part of acquisition reform. While most of the requirements were converted to performance terms, due to the military-unique nature of the product and the need for compatibility with deployed systems, it was determined that not all requirements could be converted. The issuance of this specification as "detail" is not intended to constrain technology advances in future systems.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19

MIL-DTL-38219D(USAF)

SPECIFICATIONS

DEPARTMENT OF DEFENSE

MIL-I-85470

Inhibitor, Icing, Fuel System High Flash, NATO Code Number S-1745

STANDARDS

FEDERAL

FED-STD-791

Lubricants, Liquid Fuels, and Related Products; Methods of Testing

DEPARTMENT OF DEFENSE

MIL-STD-290

Packaging of Petroleum and Related Products

(Unless otherwise indicated, copies of specifications, standards, and handbooks are available from the

Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.3 Non-Government publications. The following documents form a part of this document to the extent specified

herein. Unless otherwise specified, the issues of the documents which are DoD-adopted are those listed in the issue

of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DoDISS

are the issues of the documents cited in the solicitation (see 6.2).

AMERICAN SOCIETY FOR TESTING AND MATERIALS STANDARDSASTM D86

ASTM D86

Standard Test Method for Distillation of Petroleum Products (DoD adopted)

ASTM D93

Standard Test Method for Flash Point by Pensky-Martens Closed Tester

(DoD adopted)

ASTM D130

Standard Test Method for Detection of Copper Corrosion from

Petroleum Products by the Copper Strip Tarnish Test (DoD adopted)

ASTM D381

Standard Test Method for Existent Gum in Fuels by Jet Evaporation

(DoD adopted)

ASTM D445

Standard Test Method for Kinematic Viscosity of Transparent and

Opaque Liquids (and the Calculation of Dynamic Viscosity) (DoD adopted)

ASTM D1094

Standard Test Method for Water Reaction of Aviation Fuels (DoD adopted)

ASTM D1266

Standard Test Method for Sulfur in Petroleum Products (Lamp

Method) (DoD adopted)

ASTM D1298

Standard Test Method for Density, Relative Density (Specific

Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum

Products by Hydrometer Method (DoD adopted)

ASTM D1319

Standard Test Method for Hydrocarbon Types in Liquid Petroleum

Products by Fluorescent Indicator Adsorption

ASTM D2276

Standard Test Method for Particulate Contamination in Aviation Fuel

(DoD adopted)

ASTM D2382

Standard Test Method for Heat of Combustion of Hydrocarbon

Fuels by Bomb Calorimeter (High-Precision Method) (DoD adopted)

ASTM D2386

Standard Test Method for Freezing Point of Aviation Fuels (DoD adopted)

ASTM D2622

Standard Test Method for Sulfur in Petroleum Products by

X-Ray Spectrometry (DoD adopted)

ASTM D3120

Standard Test Method for Trace Quantities of Sulfur in Light Liquid

Petroleum Hydrocarbon by Oxidative Microcoulometry (DoD adopted)

ASTM D3227

Standard Test Method for Mercaptan Sulfur in Gasoline, Kerosene, Aviation

Turbine, and Distillate Fuels (Potentiometric Method) (DoD adopted)