MIL-DTL-38219D(USAF)
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order
(see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to contact
the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the Military Department's System Command. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be helpful, but is not mandatory.)
6.1 Intended use. The JP-7 fuel covered by this specification is intended for use in aircraft turbine engines. The
fuel covered by this specification is not intended for general acquisition. It is a limited production item to be
consumed only by systems which use engines that require this product. This is a military unique fuel for military
use. The contracting officer should contact the following organization if clarification of requirements is required:
AFRL/PRSF, Bldg 490
1790 Loop Road N
Wright-Patterson AFB OH 45433-7103.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of the specification.
b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents
referenced (see 2.2.1 and 2.3).
c. Packaging requirements (see 5.1).
d. Quantity required and size containers desired.
e. Location, injection method, and type of additives, as required.
f. One copy of the certificate of analysis that lists those items in table I should be forwarded to the acquisition
activity and the following organization for each batch of fuel acquired under this specification:
AFRL/PRSF, Bldg 490
1790 Loop Road N
Wright-Patterson AFB OH 45433-7103.
g. The acquisition activity will state if the contractor is to be required to submit a 208-liter (55-gallon) drum of
fuel, or a sample acceptable to the Air Force Research Laboratory (AFRL/PRSF) (see 4.3.2.3).
6.3 Conversion of metric units. Units of measure have been converted to the International System of Units
(Metric) in accordance with ASTM E380. If test results are obtained in units other than Metric or there is a
requirement to report dual units, ASTM E380 or ASTM D1250 Volume XI/XII should be used to convert the units.
6.4 Precaution of mixing additives. To prevent any possible reaction between the concentrated forms of different
additives (see 3.4), the fuel contractor is cautioned not to commingle additives before they are added to the fuel.
6.5 Material Safety Data Sheets. Contracting officers will identify those activities which require copies of
completed Material Safety Data Sheets prepared in accordance with FED-STD-313. The pertinent Government
mailing addresses for submission of data are listed in FED-STD-313.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business